Asus Z10PA-D8 Series Specifications Page 32

  • Download
  • Add to my manuals
  • Print
  • Page
    / 104
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 31
2-14
Chapter 2: Installation
2.5.1 Configuring the LAN controller
BeforeyoucanestablishaconnectiontotheASMB8-iKVMboard,youmustcongurethe
LANportforservermanagementusedbytheremoteservertoconnecttothelocal/central
server.
ToconguretheLANportoftheremoteserver:
1. RuntheASMC8utilityfromthesupportCDfollowingtheinstructionsintheprevious
section.
2. SetIPsource:
a. Type
ASMC8 -bmc_ip_source 1
ifyouwanttosetastaticIPaddress.
b. Type
ASMC8 -bmc_ip_source 2
ifyouwanttogetIPfromDHCPserver.
3. Type
ASMC8 -bmc_ip xxx.xxx.xxx.xxx
thenpress<Enter>toassignanyIP
addresstotheremoteserverLANport(ifnecessary).Thescreendisplaystherequest
and response buffer.
WritetheremoteserverIPaddressinapieceofpaperforreference.
c:\>ASMC8 -bmc_ip 10.10.10.243
Detect MotherBoard -> (Z10PA-D8 Series)
Detect KCS Interface
New BMC IP : 10.10.10.243
c:\>
Whennished,theutilityreturnstotheDOSprompt.
MakesurethattheassignedIPaddressforbothremoteandlocal/centralserversareinthe
samesubnet.YoucanusethenetworksettingsutilityinyourOStocheck.
4. Congureyoursubnetmaskandgatewayaddressifnecessary.
a. Type
ASMC8 -bmc_mask xxx.xxx.xxx.xxx
(yoursubnetmaskencodedin
hexadecimalsystem)
b. Type
ASMC8 -bmc_gateway xxx.xxx.xxx.xxx
(yourgatewayaddress
encodedinhexadecimalsystem)
5. Restarttheremoteserver,entertheBIOSsetup,thenbootfromtheharddiskdrive.
6. Adjustthelocal/centralservernetworksettings,ifnecessary.
Page view 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 103 104

Comments to this Manuals

No comments