Asus Internet Security Router User Manual download pdf (Page 26)

Chapter 3. Quick Start Guide Internet Security Router User’s Manual

3.1.4 Step 4. Turn on the Internet Security Router, the ADSL or cable modem and

power up your computers.

Press the Power switch on the rear panel of the Internet Security Router to the ON position. Turn on your

ADSL or cable modem. Turn on and boot up your computer(s) and any LAN devices such as hubs or switches.

Figure 3.1. Overview of Hardware Connections

You should verify that the LEDs are illuminated as indicated in Table 3.1.

Table 3.1. LED Indicators

This LED: ...should be:

POWER Solid green to indicate that the device is turned on. If this light

is not on, check if the power adapter is attached to the Internet

Security Router and if it is plugged into a power source.

LAN1 –

LAN4

Solid green to indicate that the device can communicate with

your LAN or flashing when the device is sending or receiving

data from your LAN computer.

WAN Solid green to indicate that the device has successfully

established a connection with your ISP or flashing when the

device is sending or receiving data from the Internet.

1 ... 25 26 27 ... 167

No comments

Asus Internet Security Router User Manual Page 26