Asus Internet Security Router User Manual download pdf (Page 78)

Chapter 9. Configuring Firewall/NAT Settings Internet Security Router User’s Manual

2. Select “Add New” from the Self Access rule drop-down list.

3. Select a protocol from the Protocol drop-down list. If you select TCP or UDP protocol, you will

need to enter port number as well.

4. Click on the button to create the new Self Access rule. The new rule will then be displayed

in the Self Access Rule list table at the bottom half of the Self Access Rule Configuration page.

Example

Figure 9.13 displays the screen with entries to:

„ Add a new Self Access rule to:

• Allow TCP port 80 traffic (i.e. HTTP traffic) from the LAN and deny the HTTP traffic from the WAN

port (i.e. from the external network) to the Internet Security Router.

9.6.1.4 Modify a Self Access Rule

To modify a Self Access rule, follow the instructions below:

1. Open the Self Access Rule Configuration page (see section 9.6.1.2 Access Self Access Rule

Configuration Page).

2. Click on the icon of the Self Access rule to be modified in the Self Access rule table or select

the Self Access rule from the Self Access rule drop-down list.

3. You may then disable or enable the traffic from LAN or WAN or both. Note that port number

cannot be changed if TCP or UCP protocol is selected. To modify the port number, you must first

delete the existing Self Access rule and add a new rule instead.

4. Click on the button to save the changes. The new settings for this Self Access rule will

then be displayed in the Self Access rule table located at the bottom half of the Self Access Rule

Configuration page.

9.6.1.5 Delete a Self Access Rule

To delete a Self Access rule, click on the icon of the rule to be deleted or follow the instruction below:

1. Open the Self Access Rule Configuration page (see section 9.6.1.2 Access Self Access Rule

Configuration Page).

2. Click on the icon of the Self Access rule to be deleted in the Self Access rule table or select

the Self Access rule from the Self Access rule drop-down list.

3. Click on the button to delete the rule. Note that the rule deleted will be removed from the

Self Access rule table located at the bottom half of the same configuration page.

9.6.1.6 View Configured Self Access Rules

To see existing Self Access Rules, just open the Self Access Rule Configuration page as described in section

9.6.1.2 Access Self Access Rule Configuration Page.

9.6.2 Configuring Service List

Services are a combination of Protocol and Port number. It is used in inbound and outbound ACL rule

configuration. You may use Service Configuration Page to:

„ Add a service, and set parameters for it

„ Modify an existing service

„ Delete an existing service

„ View configured services

Figure 9.14 shows the Firewall Service List Configuration page. The configured services are listed at the

bottom half of the same page.

1 ... 77 78 79 ... 167

Comments to this Manuals

No comments

Asus Internet Security Router User Manual Page 78

Comments to this Manuals

Related products and manuals for Networking Asus Internet Security Router