28
Chapter 2: Hardware information
P4S533-E
®
P4S533-E Keyboard Power Setting
KBPWR1
+5V
(Default)
1
2
+5VSB
2
3
P4S533-E
®
P4S533-E CPU Voltage Setting
VEN1
Normal
(Default)
CPU Rise 0.2V
12 23
6. Keyboard Wake Up (3 pin KBPWR1)
This allows you to disable or enable the keyboard power up function. Set
this jumper to Enable if you wish to use your keyboard (by pressing
<Spacebar>) to power up your computer. This feature requires an ATX
power supply that can supply at least 300mA on the +5VSB lead. The
default is set to Enable. (The computer will not power ON if you set this to
Enable but do not have the correct ATX power supply. NOTE: This jumper
must be set in conjunction with Wake On PS2 KB/PS2 Mouse/CIR in
4.5.1 Power Up Control.
7. CPU Voltage Setting (3 pin VEN1)
This jumper increases the voltage available to the CPU by 0.2 volts. The
default setting [2-3] only permits normal CPU voltages. Resetting the
jumper to [1-2], enables the extra voltage.
CAUTION! It is advisable not to increase the CPU voltage excessively
to prevent premature failure and/or poor CPU performance.
Comments to this Manuals