Asus P6T User Manual download pdf (Page 101)

ASUS P6T SE 4-11

Chapter 4

4.4.3 Setting the RAID item in BIOS

You must enable the RAID function in the BIOS Setup before creating RAID set(s) using

SATA HDDs. To do this:

1. Enter the BIOS Setup during POST.

2. Go to the Main menu > Storage Conguration, and then press <Enter>.

3. Set the Congure SATA as item to [RAID].

4. Save your changes, and then exit the BIOS Setup.

Refer to Chapter 3 for details on entering and navigating through the BIOS Setup.

4.4.4 Intel

Matrix Storage Manager option ROM utility

The Intel

Matrix Storage Manager Option ROM utility allows you to create RAID 0, RAID 1,

RAID 10 (RAID 0+1), and RAID 5 set(s) from Serial ATA hard disk drives that are connected

to the Serial ATA connectors supported by the Southbridge.

To enter the Intel

Matrix Storage Manager option ROM utility:

1. Turn on the system.

2. During POST, press <Ctrl+I> to display the utility main menu.

The utility supports maximum four hard disk drives for RAID conguration.

The navigation keys at the bottom of the screen allow you to move through the menus

and select the menu options.

The RAID BIOS setup screens shown in this section are for reference only and may not

exactly match the items on your screen.

Intel(R) Matrix Storage Manager option ROM v8.0.0.1038 ICH10R wRAID5

[ MAIN MENU ]

1. Create RAID Volume 3. Reset Disks to Non-RAID

2. Delete RAID Volume 4. Exit

[ DISK/VOLUME INFORMATION ]

RAID Volumes:

None dened.

Physical Disks:

Port Drive Model Serial # Size Type/Status(Vol ID)

0 ST3160812AS 9LS0HJA4 149.0GB Non-RAID Disk

1 ST3160812AS 9LS0F4HL 149.0GB Non-RAID Disk

2 ST3160812AS 3LS0JYL8 149.0GB Non-RAID Disk

3 ST3160812AS 9LS0BJ5H 149.0GB Non-RAID Disk

[↑↓]-Select [ESC]-Exit [ENTER]-Select Menu

1 ... 100 101 102 ... 112

No comments

Asus P6T User Manual Page 101