ASUS RS120-E4/PA4 6-5
6.2.1 Creating a RAID set
The LSI Logic Embedded SATA RAID Setup Utility allows you to create a RAID 0
or RAID 1 set using two types of congurations: Easy and New.
In Easy Conguration, the logical drive parameters are set automatically including
the size and stripe size (RAID 1 only).
In New Conguration, you manually set the logical drive parameters and assign the
set size and stripe size (RAID 1 only).
3. The utility main window appears. Use the arrow keys to select an option from
the Management Menu, then press <Enter>. Refer to the Management Menu
descriptions below.
At the bottom of the screen is the legend box. The keys on the legend box
allow you to navigate through the setup menu options or execute commands.
The keys on the legend box vary according to the menu level.
Menu Description
Congure Allows you to create RAID 0 or RAID 1 set using the Easy
Conguration or the New Conguration command. This menu also
allows you to view, add, or clear RAID congurations or select the
boot drive
Initialize Allows you to initialize the logical drives of a created RAID set
Objects Allows you to initialize logical drives or change the logical drive
parameters
Rebuild Allows you to rebuild failed drives
Check Consistency
Allows you to check the data consistency of the logical drives of a
created RAID set
Comments to this Manuals