Asus RS100-E4/PI2 User Manual download pdf (Page 103)

ASUS RS100-E4/PI2 6-5

6.2.1 Creating a RAID 0 set (striped)

To create a RAID 0 set:

1. From the utility main menu, select 1. Create RAID Volume, then press

<Enter>. This screen appears.

2. Enter a name for the RAID 0 set, then press <Enter>.

3. When the RAID Level item is highlighted, press the up/down arrow key

to select RAID 0(Stripe), then press <Enter>.

4. When the Disks item is highlighted, press <Enter> to select the hard

disk drives to congure as RAID. This SELECT DISKS screen appears.

Intel(R)MatrixStorageManagerOptionROMv5.0.0.1032ICH7RwRAID5

[ CREATE ARRAY MENU ]

[ DISK/VOLUMEINFORMATION]

Enterastringbetween1and16charactersinlengththatcanbeused

to uniquely identify the RAID volume. This name is case sensitive and

cannot contain special characters.

[↑↓]-Change[TAB]-Next[ESC]-PreviousMenu[Enter]-Select

Name:

RAID Level:

Disks:

StripSize:

Capacity:

Volume0

RAID0(Stripe)

SelectDisks

128KB

0.0 GB

Create Volume

[ SELECTDISKS]

[↑↓]-Previous/Next[SPACE]-Selects[ENTER]-SelectionComplete

PortDriveModelSerial#SizeStatus

0XXXXXXXXXXXXXXXXXXXXXX.XGBNon-RAIDDisk

1XXXXXXXXXXXXXXXXXXXXXX.XGBNon-RAIDDisk

2XXXXXXXXXXXXXXXXXXXXXX.XGBNon-RAIDDisk

3XXXXXXXXXXXXXXXXXXXXXX.XGBNon-RAIDDisk

Select2to4diskstouseincreatingthevolume.

5. Use the up/down arrow key to highlight a drive, then press <Space>

to select. A small triangle marks the selected drive. Press <Enter>

after completing your selection.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 155 156

No comments

Asus RS100-E4/PI2 User Manual Page 103