Asus RS100-E4/PI2 User Manual Page 57

  • Download
  • Add to my manuals
  • Print
  • Page
    / 156
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 56
ASUS RS100-E4/PI2 4-1 7
10. SSI power connectors (24-pin ATXPWR1, 8-pin ATX12V2)
These connectors are for SSI power supply plugs. The power supply plugs
are designed tot these connectors in only one orientation. Find the proper
orientation and push down rmly until the connectors completelyt.
Use of an SSI 12 V Specication 2.0-compliant power supply unit
(PSU) that provides a minimum power of 450 W is recommended for
a fully-congured system.
By default, four ATX12V2 connector pins are covered to prevent
incorrent insertion of a 4-pin ATX +12V power plug. Remove this
cover when using a PSU with an 8-pin ATX +12V power plug.
Do not forget to connect the 4-pin or 8-pin ATX +12 V power plug;
otherwise, the system will not boot up.
We recommend that you use a PSU with a higher power output when
conguring a system with more power consuming devices. The system
may become unstable or may not boot up if the power is inadequate.
You must install a PSU with a higher power rating if you intend to
install additional devices.
P5M2-M/RS100-E4
®
P5M2-M/RS100-E4 ATX Power Connectors
24-pin Power Connector
ATXPWR1
+3 Volts
+3 Volts
Ground
+5 Volts
+5 Volts
Ground
Ground
Power OK
+5V Standby
+12 Volts
-5 Volts
+5 Volts
+3 Volts
-12 Volts
Ground
Ground
Ground
PSON#
Ground
+5 Volts
+12 Volts
+3 Volts
+5 Volts
1
Ground
ATX12V1
+12V DC
GND
+12V DC
GND
Page view 56
1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 155 156

Comments to this Manuals

No comments