Asus RS120-E5/S User Manual download pdf (Page 138)

6-38 Chapter 6: RAID conguration

6.3.6 Resetting disks to Non-RAID

Take caution before you reset a RAID volume hard disk drive to non-RAID.

Resetting a RAID volume hard disk drive deletes all internal RAID structure on

the drive.

To reset a RAID set hard disk drive:

1. From the utility main menu, select

3. Reset Disks to Non-RAID

, then press

<Enter> to display this screen.

2. Use the up/down arrow key to highlight the RAID set drive you want to reset,

then press <Spacebar> to select.

3. Press <Enter> to reset the RAID set drive. A conrmation message appears.

4. Press <Y> to reset the drive or press <N> to return to the utility main menu.

5. Follow steps 2 to 4 to select and reset other RAID set drives.

[ RESET RAID DATA ]

Resetting RAID data will remove internal RAID structures

from the selected RAID disks. By removing these structures,

the drive will revert back to a non-RAID disk.

WARNING: Resetting a disk causes all data on the disk to be lost.

Port Drive Model Serial # Size Status

0 XXXXXXXXXXXX XXXXXXXX XX.XGB Member Disk

1 XXXXXXXXXXXX XXXXXXXX XX.XGB Member Disk

Select the disks that should be reset.

[

↑↓

]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete

6.3.7 Rebuilding the RAID

This option is only for the RAID 1, RAID 5 and RAID 10 level.

Rebuilding the RAID with other non-RAID disk:

1. If one member of physical SATA Hard disk within the array is off-line or failed,

the status of array will become to be degraded from normal. The following

displays as:

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 163 164

No comments

Asus RS120-E5/S User Manual Page 138