2-23ASUS RS120-E5/S
To reinstall the device fan:
1. Insert the fan to the fan cage. The
airow directional arrow on the fan
side should point towards the rear
panel.
2. Connect the device fan cable to the
fan connector on the motherboard.
2.8.3 Device fan
The system comes with one 28 mm x 40 mm (15500 rpm) device fan.
Refer to the illustration below for location of the device fans.
To uninstall the device fan:
1. Disconnect the device fan
cable from the connector on the
motherboard.
2. Lift the fan, then set aside.
28 mm x 40 mm device fan
Comments to this Manuals