Asus DiGiMatrix User Manual download pdf (Page 121)

5-3

ASUS DiGiMatrix

4. Insert the USB flash disk or the floppy disk that contains the new

BIOS file into a USB port or a USB floppy disk drive. You will receive

the error message, “WARNING! Device not ready.” if you proceed

to step 5 without the disk in the drive or without the USB flash disk.

5. At the prompt, “Please Enter File Name for NEW BIOS: _”, type in

the BIOS file name that you downloaded from the ASUS website,

then press <Enter>.

EZ Flash will automatically access drive A to look for the file name

that you typed. When found, the following message appears on

screen.

If you accidentally typed in a wrong BIOS file name, the error

message, “WARNING! File not found.” appears. Press <Enter> to

remove the message, then type in the correct file name. Press

<Enter>.

6. At the above prompt, type Y to continue with the update process.

Pressing N exits the EZ Flash screen and reboots the system without

updating the BIOS.

The following prompts appear if you typed Y.

7. Press Y to update the main BIOS area.

[BIOS Information in File]

BIOS Version: P4SQ Boot Block

WARNING! Continue to update the BIOS (Y/N)? _

DO NOT shutdown or reset the system while updating the BIOS area!

Doing so may cause system boot failure.

8. When the update process is done, the message, “Press a key to

reboot” appears. Press any key to reboot the system with the new

BIOS.

Flash Memory: SST 49LF004

Update Main BIOS area (Y/N)? _

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 157 158

No comments

Asus DiGiMatrix User Manual Page 121