Asus Motherboard A8V-XE User Manual download pdf (Page 62)

2-20 Chapter 2: BIOS setup

Spread Spectrum [Auto]

Enables or disables the clock generator spread spectrum.

Conﬁguration options: [Disabled] [+/- 0.1%] [+/- 0.2%] [+/- 0.3%]

[+/- 0.4%] [+/- 0.5%] [+/- 0.6%] [+/- 0.7%] [+/- 0.8%] [+/- 0.9%]

[+/- 1.0%] [Auto]

PCIEx clock Sync. to CPU [Enable]

Enables or disables the PCI ExpressTM synchronous clock to the CPU.

Conﬁguration options: [Disable] [Enable]

x PLL2 Clock [XXX] (value is auto-detected)

Allows you to set the x PLL2 clock frequency. This item is user-

conﬁgurable only when the PCIEx clock Sync. to CPU item is set to

Disabled. The BIOS detects the default value of this item. Press

<Enter> then key-in desired x PLL2 clock frequency within range.

PCI clock Sync. to CPU [Enable]

Enables or disables the PCI synchronous clock to the CPU.

Conﬁguration options: [Disable] [Enable]

PCI Clock [XXX] (value is auto-detected)

Allows you to set the PCI clock frequency. This item is user-

conﬁgurable only when the PCI clock Sync. to CPU item is set to

Disabled. The BIOS detects the default value of this item. Press

<Enter> then key-in desired PCI clock frequency within range.

CPU Clock [XXX] [200 MHz]

Displays the frequency sent by the clock generator to the system bus

and PCI bus. The default value of this item is auto-detected by the

BIOS. Use the <+> and <-> keys to adjust the CPU frequency.

CPU Multiplier [Auto]

Sets the CPU multiplier. The conﬁguration options vary depending on the

type of CPU installed. Conﬁguration options: [Auto] [x4] [x4.5] [x5] [x5.5]

[x6] [x6.5] [x7] [x7.5] [x8] [x8.5] [x9]

Hammer Vid control [Startup]

Sets the Hammer Voltage ID control.

Conﬁguration options: [Startup] [1.550 v] [1.525 v] [1.500 v] [1.475 v]

[1.450 v] [1.425 v] [1.400 v] [1.375 v] [1.350 v] [1.325 v] [1.300 v]

[1.275 v] [1.250 v] [1.225 v] [1.200 v] [1.175 v] [1.150 v] [1.125 v]

[1.100 v] [1.075 v] [1.050 v] [1.025 v] [1.000 v] [0.975 v] [0.950 v]

[0.925 v] [0.900 v] [0.875 v] [0.850 v] [0.825 v] [0.800 v] [0.775v]

[0.750 v]

Selecting a very high CPU frequency may cause the system to become

unstable! If this happens, revert to the default setting.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 85 86

No comments

Asus Motherboard A8V-XE User Manual Page 62