Asus M2N-VM DVI User Manual download pdf (Page 29)

ASUS M2N-VM DVI 1-17

1.7.3 Installing a DIMM

1. Unlock a DIMM socket by pressing

the retaining clips outward.

2. Align a DIMM on the socket such

that the notch on the DIMM matches

the break on the socket.

3. Firmly insert the DIMM into the

socket until the retaining clips snap

back in place and the DIMM is

properly seated.

Make sure to unplug the power supply before adding or removing DIMMs or

other system components. Failure to do so may cause severe damage to both

the motherboard and the components.

1.7.4 Removing a DIMM

To remove a DIMM:

1. Simultaneously press the retaining

clips outward to unlock the DIMM.

2. Remove the DIMM from the socket.





  

direction. DO NOT force a DIMM into a socket to avoid damaging the

DIMM.

• The DDR2 DIMM sockets do not support DDR DIMMs. Do not install

DDR DIMMs to the DDR2 DIMM sockets.

Unlocked retaining clip

DDR2 DIMM notch

E3608_M2N-VM-DVI.indb 12 12/27/07 4:38:28 PM

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 99 100

No comments

Asus M2N-VM DVI User Manual Page 29