Asus M2N-VM DVI User Manual download pdf (Page 63)

ASUS M2N-VM DVI 2-17

2.3.5 Primary IDE Master/Slave

While entering Setup, the BIOS automatically detects the presence of IDE devices.

There is a separate sub-menu for each IDE device. Select a device item then

press <Enter> to display the IDE device information.

Primary IDE Master

Device : Not Detected

Type [Auto]

LBA/Large Mode [Auto]

Block (Multi-Sector Transfer) M [Auto]

PIO Mode [Auto]

DMA Mode [Auto]

SMART Monitoring [Auto]

32Bit Data Transfer [Enabled]

Select the type

of device connected

to the system

The BIOS automatically detects the values opposite the dimmed items (Device,





N/A if no IDE device is installed in the system.

Type [Auto]

Selects the type of IDE drive. Setting to Auto allows automatic selection of the



CD-ROM drive. Select ARMD (ATAPI Removable Media Device) if your device is

either a ZIP, LS-120, or MO drive.



LBA/Large Mode [Auto]

Enables or disables the LBA mode. Setting to Auto enables the LBA mode if the

device supports this mode, and if the device was not previously formatted with LBA

mode disabled.



Block (Multi-Sector Transfer) M [Auto]

Enables or disables data multi-sectors transfers. When set to Auto, the data

transfer from and to the device occurs multiple sectors at a time if the device

supports multi-sector transfer feature. When set to [Disabled], the data transfer

from and to the device occurs one sector at a time.



E3608_M2N-VM-DVI.indb 6 12/27/07 4:39:42 PM

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 99 100

No comments

Asus M2N-VM DVI User Manual Page 63