Asus P5Q SE PLUS User Manual download pdf (Page 73)

ASUS P5Q SE Plus

2-21

2.4.9 Ai Transaction Booster [Auto]

Allows you to set the system performance. Conguration options: [Auto] [Manual]

The following two sub-items appear only when you set the Ai Transaction

Booster item to [Manual].

Common Performance Level [05]

Set this item to a higher level for better compatibility or a lower level for better

performance. Use the <+> and <-> keys to adjust the value. The values range

from 1 to 31.

Pull-In of CHA/B PH1/2/3/4 [Disabled]

Set this item to [Enabled] to apply enhancement on DRAM Channel A and B,

Phase 1 to 4. The number of phases is determined by DRAM frequency and

FSB strap. Conguration options: [Disabled] [Enabled]

The following ten (10) items on the next page are adjusted by typing the desired

values using the numeric keypad and press the <Enter> key. You can also use

the <+> and <-> keys to adjust the value. To restore the default setting, type

[auto] using the keyboard and press the <Enter> key.

2.4.10 CPU Voltage [Auto]

Allows you to set the CPU VCore voltage. The values range from 0.85000V to

1.50000V with a 0.00625V interval.

Refer to the CPU documentation before setting the CPU Vcore voltage. Setting

a high VCore voltage may damage the CPU permanently, and setting a low

VCore voltage may make the system unstable.

2.4.11 FSB Termination Voltage [Auto]

Allows you to set the front side bus termination voltage. The values range from

1.20V* to 1.50V with a 0.10V interval.

The minimum value of this item becomes 1.10V when a 45nm CPU is installed.

2.4.12 Memory Voltage [Auto]

Allows you to set the Memory voltage. The values range from 1.80V to 2.30V with

a 0.10V interval.

2.4.13 North Bridge Voltage [Auto]

Allows you to set the North Bridge voltage. The values range from 1.10V to 1.40V*

with a 0.10V interval.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 99 100

No comments

Asus P5Q SE PLUS User Manual Page 73