Asus TUV4X User Manual download pdf (Page 21)

ASUS TUV4X User’s Manual 21

3. HARDWARE SETUP

3. H/W SETUP

Motherboard Settings

4) Voltage I/O Setting (VIO)

This jumper allows you to select the voltage supplied to the DRAM, chipset,

AGP, and PCI. Keep the jumper to its default setting Normal. When system

overclocking requires a higher voltage, set this jumper to 3.6V.

WARNING! Using a higher voltage may help when overclocking the system but

it may shorten the life of system components. As much as possible, keep the VIO

jumper to its default setting for better system stability.

5) Clear RTC RAM

These two solder points allow you to clear the Real Time Clock (RTC) RAM in

CMOS. You can clear the CMOS memory of date, time, and system setup

parameters by erasing the CMOS RTC RAM data. The RAM data in CMOS,

that include system setup information such as system passwords, is powered by

the onboard button cell battery.To erase the RTC RAM: (1) unplug the computer,

(2) short the solder points, (3) plug and turn ON the computer, (4) hold down the

<Del> key during the boot process and enter BIOS setup to re-enter data.

TUV4X VIO Setting

VIO

Normal 3.60 Volt

TUV4X

TUV4X Clear RTC RAM

CLRTC

Short solder points

to Clear CMOS

CR2032 3V

Lithium Cell

CMOS Power

TUV4X

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 93 94

No comments

Asus TUV4X User Manual Page 21