Asus AAM6010EV-T4 User Manual download pdf (Page 24)

AAM6010EV-T4 User Manual

The apply button will temporarily save this connection. To make the change permanent you need to click

on Tools (at the top of the page) and select System Commands. At the system commands page, click on

Save All.

4.5.2 Changing the CPEs IP address

You can change the CPE’s IP address by going to the Home screen, click setup and under LAN Setup,

select Management. This will bring up the screen shown in Figure 12.

4.5.2.1 Static IP address assignment

Your CPE’s default IP address and subnet mask are 192.168.1.1/255.255.255.0; this subnet mask will allow

the CPE to support 254 users. If you want to support a larger number of users you can change the subnet

mask; but remember. The DHCP server is defaulted to only give out 255 IP addresses. Further remember

that if you change your CPEs’ IP address and you have DHCP enabled, the DHCP configuration must

reside within the same subnet

The default CPE is the routing device used to forward all traffic that is not addressed to a station within the

local subnet. Your ISP will provide you with the default CPE Address. Figure 12 shows a default CPE

address of 192.168.1.1 because this was the default CPE defined when the CLIP connection was configured.

The hostname can be any alphanumeric word that does not contain spaces. The domain name is used to in

conjunction with the host name to uniquely identify the CPE. To access the CPE’s web pages the user can

type 192.168.1.1 (the CPE’s default IP address) or type mygateway.

Figure 12 (Management IP address)

The apply button will temporarily save this connection. To make the change permanent you need to click

on Tools (at the top of the page) and select System Commands. At the system commands page, click on

Save All.

4.5.3 Firewall/NAT Services

You can enable or disable Firewall and NAT by going to the Home screen, click setup and under LAN

Setup, select Firewall/NAT Services. By unselecting the “Enable Firewall and NAT Services” button the

firewall and NAT services is disabled for all WAN connections.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 37 38

No comments

Asus AAM6010EV-T4 User Manual Page 24