Asus A88XM-A User Manual download pdf (Page 49)

ASUS A88XM-A 2-17

CPB Mode [Auto]

Disables the CPB (Core Performance Boost) mode or set it to [Auto] for automatic

conguration. Conguration options: [Disabled] [Auto]

C6 Mode [Enabled]

Enables or disables C6 mode. Conguration options: [Enabled] [Disabled]

IOMMU [Disabled]

Set this item to [Enabled] to show IOMMU Mode. Conguration options: [Enabled] [Disabled]

Bank Interleaving [Enabled]

Enables or disables the bank memory interleaving. Conguration options: [Enabled]

[Disabled]

Channel Interleaving [Enabled]

Enables or disables the channel memory interleaving. Conguration options: [Enabled]

[Disabled]

Core Leveling Mode [Automatic mode]

Allows you to change the number of working Compute Unit on the system. Conguration

options: [Automatic mode] [One core per processor] [One Compute Unit] [One core per

Compute Unit]

2.6.2 SATA Conguration

While entering Setup, the BIOS automatically detects the presence of SATA devices. The

SATA Port items show Not Present if no SATA device is installed to the corresponding SATA

port.

OnChip SATA Channel [Enabled]

Enables or disables onboard channel SATA port. Conguration options: [Disabled] [Enabled]

OnChip SATA Type [AHCI]

Allows you to set the SATA conguration.

[IDE] Set to [IDE] when you want to use the Serial ATA hard disk drives as

Parallel ATA physical storage devices.

[RAID] Set to [RAID] when you want to create a RAID conguration from the SATA

hard disk drives.

[AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the AHCI

(Advanced Host Controller Interface). The AHCI allows the onboard storage

driver to enable advanced Serial ATA features that increases storage

performance on random workloads by allowing the drive to internally

optimize the order of commands.

SATA Port 5 - Port 6 [AHCI]

This item only appears when OnChip SATA Type is set to [AHCI]. If SATA ports 5,

6 are congured as [AHCI], the ports can only be used under Windows

OS with the

requested drivers installed. Set to [IDE] instead of [AHCI] to access devices on SATA

ports 5, 6 before entering OS. Conguration options: [AHCI] [IDE]

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 67 68

No comments

Asus A88XM-A User Manual Page 49