Asus A88XM-A User Manual download pdf (Page 50)

2-18 Chapter 2: BIOS information

S.M.A.R.T. Status Check [Enabled]

S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When

read/write of your hard disk errors occur, this feature allows the hard disk to report warning

messages during the POST. Conguration options: [Enabled] [Disabled]

2.6.3 USB Conguration

The items in this menu allow you to change the USB-related features.

The USB Devices item shows the auto-detected values. If no USB device is detected, the

item shows None.

USB Device Enable [Enabled]

Allows you to enable or disable all USB ports. Conguration options: [Disabled] [Enabled]

Legacy USB Support [Enabled]

[Enabled] Enables the support for USB devices on legacy operating systems (OS).

[Disabled] The USB devices can be used only for the BIOS setup program.

[Auto] Allows the system to detect the presence of USB devices at startup. If

detected, the USB controller legacy mode is enabled. If no USB device is

detected, the legacy USB support is disabled.

Legacy USB3.0 Support [Enabled]

[Enabled] Enables the support for USB 3.0 devices on legacy operating systems

(OS).

[Disabled] Disables the function.

EHCI Hand-off [Disabled]

[Enabled] Enables the support for operating systems without an EHCI hand-off

feature.

[Disabled] Disables the function.

USB Single Port Control

Allows you to enable/disable individual USB ports.

SATA Port 5 - Port 6 [RAID]

This item only appears when OnChip SATA Type is set to [RAID]. If SATA ports 5,

6 are congured as [RAID], the ports can only be used under Windows

OS with the

requested drivers installed. Set to [IDE] instead of [RAID] to access devices on SATA

ports 5, 6 before entering OS. Conguration options: [RAID] [IDE]

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 67 68

No comments

Asus A88XM-A User Manual Page 50