Asus Z8PE-D18 User Manual download pdf (Page 128)

5-28 Chapter 5: RAID conguration

2. Enter a name for the recovery set and press <Enter>.

3. When the

RAID Level

item is selected, press the up/down arrow key to select

Recovery

, and then press <Enter>.

4. When the

Disks

item is selected, press <Enter> to select the hard disk drives

you want to include in the recovery set. The

SELECT DISKS

screen appears.

5. Use the up/down arrow key to select a drive, press <TAB> to select a Master

disk, and then press <SPACE> to select a Recovery disk. A small triangle

marks the selected drive. Press <Enter> after completing your selection.

6. When the

Sync

item is selected, use the up/down arrow key to select a sync

option that you want and press <Enter>.

7. When the

Create Volume

item is selected, press <Enter>. The following

warning message appears.

[ SELECT DISKS ]

Port Drive Model Serial # Size Status

0 ST3160812AS 9LS0HJA4 149.0GB Non-RAID Disk

1 ST3160812AS 9LS0F4HL 149.0GB Non-RAID Disk

2 ST3160812AS 3LS0JYL8 149.0GB Non-RAID Disk

3 ST3160812AS 9LS0BJ5H 149.0GB Non-RAID Disk

Select 1 Master and 1 Recovery disk to create volume.

[

↑↓

]-Prev/Next [TAB]-(M)aster [SPACE]-(R)ecovery [ENTER]-Done

WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.

Are you sure you want to create this volume? (Y/N):

8. Press <Y> to create the recovery set and return to the main menu, or <N> to

go back to the

CREATE VOLUME

menu.

If a recovery set is created, you cannot add more RAID sets even when you

have more non-RAID disks installed in your system.

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 163 164

No comments

Asus Z8PE-D18 User Manual Page 128