6-10 Chapter 6: Driver installation
6. When asked if you will load additional RAID controller drivers, select No, then
press <Enter>.
5. Insert the Red Hat
®
Enterprise RAID driver disk to the oppy disk drive, select
OK, then press <Enter>.
The drivers for the RAID controller are installed to the system.
Insert Driver Disk
Insert your driver disk into /dev/fd0
and press “OK” to continue.
OK
Back
7. Follow the onscreen instructions to nish the OS installation.
8. If you are installing RHEL AS5, when the installation is completed, DO NOT
click Reboot. Press <Ctrl> + <Alt> + <F2> to switch to the command-line
interface from graphic user interface, and execute replace_ahci.sh following
the instruction of step 9.
9. Type the following commands when using a Legacy oppy.
mkdir /mnt/driver
mount /dev/fd0 /mnt/driver
cd /mnt/driver
sh replace_ahci.sh
reboot
More Driver Disks?
Do you wish to load any more
driver disks?
Yes No
Comments to this Manuals