Asus Z8PH-D12/IFB User Manual download pdf (Page 21)

ASUS Z8NH-D12 Series 2-3

2.1 Before you proceed

Take note of the following precautions before you install motherboard components or change

any motherboard settings.

• Unplug the power cord from the wall socket before touching any

component.

• Use a grounded wrist strap or touch a safely grounded object or a metal

object, such as the power supply case, before handling components to

avoid damaging them due to static electricity.

• Hold components by the edges to avoid touching the ICs on them.

• Whenever you uninstall any component, place it on a grounded antistatic

pad or in the bag that came with the component.

• Before you install or remove any component, ensure that the power supply

is switched off or the power cord is detached from the power supply. Failure

to do so may cause severe damage to the motherboard, peripherals, and/or

components.

Onboard LED

1. Standby Power LED

The motherboard comes with a standby power LED. The green LED lights up

to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a

reminder that you should shut down the system and unplug the power cable

before removing or plugging in any motherboard component. The illustration

below shows the location of the onboard LED.

1 ... 20 21 22 ... 170

No comments

Asus Z8PH-D12/IFB User Manual Page 21