Asus Z8PH-D12/IFB User Manual download pdf (Page 55)

ASUS Z8NH-D12 Series 3-3

3.1 Starting up for the rst time

1. After making all the connections, replace the system case cover.

2. Ensure that all switches are off.

3. Connect the power cord to the power connector at the back of the system

chassis.

4. Connect the power cord to a power outlet that is equipped with a surge

protector.

5. Turn on the devices in the following order:

a. Monitor

b. External SCSI devices (starting with the last device on the chain)

c. System power

6. After applying power, the system power LED on the system front panel case

lights up. For systems with Proprietary power supplies, the system LED lights

up when you press the Proprietary power button. If your monitor complies

with “green” standards or if it has a “power standby” feature, the monitor LED

may light up or switch between orange and green after the system LED turns

on.

The system then runs the power-on self-test or POST. While the tests are

running, the BIOS beeps or additional messages appear on the screen. If you

do not see anything within 30 seconds from the time you turned on the power,

the system may have failed a power-on test. Check the jumper settings and

connections or call your retailer for assistance.

7. At power on, hold down the <Del> key to enter the BIOS Setup. Follow the

instructions in Chapter 4.

1 ... 54 55 56 ... 170

No comments

Asus Z8PH-D12/IFB User Manual Page 55