Asus Z8PH-D12/IFB User Manual download pdf (Page 93)

ASUS Z8NH-D12 Series 4-37

After you have set a supervisor password, the other items appear to allow you to

change other security settings.

User Access Level [Full Access]

This item allows you to select the access restriction to the Setup items.

Configuration options: [No Access] [View Only] [Limited] [Full Access]

[No Access] prevents user access to the Setup utility.

[View Only] allows access but does not allow change to any field.

[Limited] allows changes only to selected fields, such as Date and Time.

[Full Access] allows viewing and changing all the fields in the Setup utility.

Change User Password

Select this item to set or change the user password. The User Password item on

top of the screen shows the default Not Installed. After you set a password, this

item shows Installed.

To set a User Password:

1. Select the Change User Password item and press <Enter>.

2. On the password box that appears, type a password composed of at least six

letters and/or numbers, then press <Enter>.

3. Confirm the password when prompted.

The message “Password Installed” appears after you set your password

successfully.

To change the user password, follow the same steps as in setting a user password.

Password Check [Setup]

When set to [Setup], BIOS checks for user password when accessing the Setup

utility. When set to [Always], BIOS checks for user password both when accessing

Setup and booting the system. Configuration options: [Setup] [Always]

BIOS SETUP UTILITY

Main Advanced Server Power Boot Tools Exit

Supervisor Password : Installed

User Password : Not Installed

Change Supervisor Password

User Access Level [Full Access]

Change User Password

Password Check [Setup]

<Enter> to change

password.

<Enter> again to

disable password.

1 ... 92 93 94 ... 170

No comments

Asus Z8PH-D12/IFB User Manual Page 93