Asus Dual Pentium III Group Server AP200 User Manual download pdf (Page 22)

IV. Hardware Setup

AP200 Hardware Reference Guide

IV. HW Setup

Floppy Disk Drive Cable Connections

The 1.44MB floppy disk drive requires signal and power connections. Align

the red stripes of the signal and power cables so that they face each other.

Carefully insert the connector while visually watching the progress so that

proper alignment and insertion is made.

5.25” Device Cage

4-4. 5.25” Device Cage

Before CD-ROM, tape, or hard disk drives can be installed or removed from

the 5.25” device cage, you must remove the device cage from the chassis.

5.25” Device Cage Removal Procedure

1. Rotate the locking lever. (See 4-4. 3.25” Device Cage.)

2. Pull the device cage to the left side of the chassis.

To mount the 5.25” device cage, use the reverse procedure.

Red stripe of signal cable

Red stripe of power cable

1.44MB Floppy Disk Drive Connections

5.25” Device Bay 3

5.25” Device Bay 2

5.25” Device Bay 1

5.25” Device Cage with a CD-ROM in its

Topmost Bay

Locking

Lever

1 ... 21 22 23 ... 32

No comments

Asus Dual Pentium III Group Server AP200 User Manual Page 22