Asus Dual Pentium III Group Server AP200 User Manual download pdf (Page 25)

IV. Hardware Setup

AP200 Hardware Reference Guide

IV. HW Setup

Air Circulation System

External SCSI Terminator

In order to prevent SCSI signal loss, the provided external SCSI terminator

must be used at the end of the 68-pin SCSI cable. 50-pin SCSI cables may

also use terminators but usually use termination jumpers on the device it-

self. All termination jumpers must be removed when using the external SCSI

terminator.

4-6. Air Circulation System

Fan Replacement

The front and rear fans are both secured by plastic housings. The fan hous-

ings can be removed by pressing in the clip and sliding the housing upward.

IMPORTANT: When replac-

ing the fans, be sure that both fans

rotate in the same direction. Use the

manufacturer’s sticker on one side

of the fan as a reference. The air

should flow from the rear of the

chassis to the front of the chassis.

Press the clip with a screwdriver to

release.

1 ... 24 25 26 27 28 29 30 31 32

No comments

Asus Dual Pentium III Group Server AP200 User Manual Page 25