Asus P2E-B User Manual download pdf (Page 15)

ASUS P2E-B User’s Manual 15

III. INSTALLATION

Jumper Settings

1. Real Time Clock (RTC) RAM (CLRTC)

The CMOS RAM is powered by the onboard button cell battery. To clear the

RTC data: (1) Unplug your computer, (2) Short solder points, (3) Turn on your

computer, (4) Hold down <Delete> during bootup and enter BIOS setup to re-

enter user preferences.

RTC RAM CLRTC

Clear Data [short solder points momentarily]

P2E-B Clear RTC RAM

CLRTC

2. Keyboard Power Up (KBPWR)

This allows you to disable or enable the keyboard power up function. Set this

jumper to Enable if you wish to use your keyboard (by pressing the space bar) to

power up your computer. This feature requires an ATX power supply that can

supply at least 300mAmp on the +5VSB lead. The default is set to Disable

because not all computers have the appropriate ATX power supply. Your com-

puter will not power on if you set this to Enable and are not using the proper

ATX power supply.

Setting KBPWR

Disable [1-2] (default)

Enable [2-3]

Disable

(Default)

123

Enable

P2E-B Keyboard Power

III. INSTALLATION

(Jumpers)

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 63 64

No comments

Asus P2E-B User Manual Page 15