Asus P2E-B User Manual download pdf (Page 32)

32 ASUS P2E-B User’s Manual

III. INSTALLATION

(Connectors)

III. INSTALLATION

18. ATX Power Supply Connector (ATXPWR, 20-pins)

This connector connects to a ATX power supply. The plug from the power supply

will only insert in one orientation because of the different hole sizes. Find the

proper orientation and push down _ërmly making sure that the pins are aligned.

IMPORTANT: Make sure that your ATX power supply can supply at least

10mAmp on the 5-volt standby lead (5VSB). You may experience difficulty in

powering on your system if your power supply cannot support the load. For

Wake on LAN support, your ATX power supply must supply at least 720mAmp.

P2E-B ATX Power Connector

+3.3Volts

-12.0Volts

Ground

Power Supply On

Ground

-5.0 Volts

+5.0 Volts

Power Good

+12.0Volts

+3.3 Volts

Ground

+5.0 Volts

Ground

+5.0 Volts

Ground

+5V Standby

19. AT Power Supply Connector (POWER, 12-pins)

This connector connects to a standard 5 Volt power supply. To connect the leads

from the power supply, ensure first that the power supply is not plugged. Most

power supplies provide two plugs (P8 and P9), each containing six wires, two of

which are black. Orient the connectors so that the black wires are together.

P2E-B AT Power Connector

Power Plugs from

Power Supply

P9P8

RED

WHT

BLK

BLU

YLW

RED

ORG

Power Connector

on Motherboard

+12V

GND

-5V

-12V

+5V

Using a slight angle, align the plastic guide pins on the lead to their receptacles

on the connector. Once aligned, press the lead onto the connector until the lead

locks into place.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 63 64

Comments to this Manuals

No comments

Asus P2E-B User Manual Page 32

Comments to this Manuals

Related products and manuals for Motherboard Asus P2E-B