Asus P5QC User Manual download pdf (Page 172)

4-60 Chapter 4: Software support

4.4.3 Intel

RAID congurations

This motherboard supports RAID 0, RAID 1, RAID 5, RAID 10 and Intel

Matrix

Storage congurations for Serial ATA hard disks drives through the Intel

ICH10R

Southbridge chip.

Setting the RAID item in BIOS

You must set the RAID item in the BIOS Setup before you can create a RAID

set(s). To do this:

1. Enter the BIOS Setup during POST.

2. Go to the

Main

menu, select

Storage Conguration

, then press <Enter>.

3. Select the item

Configure SATA as

, then press <Enter> to display the

conguration options.

4. Select [RAID] from the

Congure SATA as

item options, then press <Enter>.

5. Save your changes, then exit the BIOS Setup.

Refer to the system or the motherboard user guide for details on entering and

navigating through the BIOS Setup.

4.4.2 Installing Serial ATA hard disks

The motherboard supports Serial ATA hard disk drives. For optimal performance,

install identical drives of the same model and capacity when creating a disk array.

To install the SATA hard disks for a RAID conguration:

1. Install the SATA hard disks into the drive bays.

2. Connect the SATA signal cables.

3. Connect a SATA power cable to the power connector on each drive.

1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 187 188

No comments

Asus P5QC User Manual Page 172