Asus P5QC User Manual download pdf (Page 174)

4-62 Chapter 4: Software support

Creating a RAID 0 set (striped)

To create a RAID 0 set:

1. From the utility main menu, select

1. Create RAID Volume

and press

<Enter>. The following screen appears.

2. Enter a name for the RAID 0 set and press <Enter>.

3. When the RAID Level item is highlighted, press the up/down arrow key to

select

RAID 0(Stripe)

, and then press <Enter>.

4. When the Disks item is highlighted, press <Enter> to select the hard disk

drives to congure as RAID. The following screen appears.

Intel(R) Matrix Storage Manager option ROM v8.0.0.1027 ICH10R wRAID5

[ CREATE VOLUME MENU ]

[ HELP ]

Enter a unique volume name that has no special characters and is

16 characters or less.

[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [Enter]-Select

Name:

RAID Level:

Disks:

Strip Size:

Capacity:

Volume0

RAID0(Stripe)

Select Disks

128KB

XXX GB

Create Volume

[ SELECT DISKS ]

[↑↓]-Previous/Next [SPACE]-SelectsDisk [ENTER]-Done

Port Drive Model Serial # Size Status

0 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk

1 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk

2 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk

3 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk

Select 2 to 6 disks to use in creating the volume.

5. Use the up/down arrow key to highlight a drive, and then press <Space>

to select. A small triangle marks the selected drive. Press <Enter> after

completing your selection.

1 2 ... 169 170 171 172 173 174 175 176 177 178 179 ... 187 188

No comments

Asus P5QC User Manual Page 174