Asus P7H55/USB3 User Manual download pdf (Page 50)

2-10 Chapter 2: BIOS information

2.4.4 Intel(R) SpeedStep(TM) Tech [Enabled]

When set to [Disabled], the CPU runs at its default speed. When set to [Enabled], the CPU

speed is controlled by the operating system. Conguration options: [Disabled] [Enabled]

2.4.5 Intel(R) TurboMode Tech [Enabled]

This item appears only if you set the CPU Ratio Setting item to [Auto]. Turbo mode allows

processor cores to run faster than marked frequency in specic condition.

Conguration options: [Disabled] [Enabled]

2.4.6 Xtreme Phase Full Power Mode [Auto]

[Auto] Automatic conguration.

[Enabled] Enables Full Power Mode to ensure the best CPU overclocking

performance.

BCLK Frequency [XXX]

This item appears when you set the AI Overclock Tuner item to [Manual], [D.O.C.P.] or

[X.M.P.] and allows you to adjust the Internal Base Clock (BCLK). Use the <+> and <-> keys

to adjust the value. You can also type the desired value using the numeric keypad. The

values range from 80 to 500.

PCIE Frequency [XXX]

This item appears only when you set the AI Overclock Tuner item to [Manual] and allows

you to set the PCI Express frequency. Use the <+> and <-> keys to adjust the PCIE

frequency. The values range from 100 to 200.

2.4.7 DRAM Frequency [Auto]

Allows you to set the DDR3 operating frequency.

Conguration options when set the AI Overclock Tuner item to [Auto] or [X.M.P.]:

[Auto] [DDR3-800MHz] [DDR3-1066MHz] [DDR3-1333MHz] [DDR3-1600]

Conguration options when set the AI Overclock Tuner item to [D.O.C.P]:

[Auto] [DDR3-900MHz] [DDR3-1200MHz] [DDR3-1500MHz] [DDR3-1800]

• The DRAM Frequency conguration options vary with the BCLK Frequency item

settings.

• According to Intel CPU spec, CPUs with a core frequency of 2.66G support the

maximum DIMM frequency of up to DDR3 1333. To use DIMMs of a higher frequency

with a 2.66G CPU, enable the DRAM O.C. Prole feature in BIOS. Refer to section

2.4.2 Ai Overclock Tuner for details.

Selecting a very high DRAM frequency may cause the system to become unstable! If this

happens, revert to the default setting.

2.4.8 QPI Frequency [Auto]

Allows you to set the QuickPath Interconnect (QPI) frequency.

Conguration options: [Auto] [4270MHz] [4800MHz]

2.4.9 ASUS/3rd Party UI Priority [ASUS Utility]

[ASUS Utility] Prioritizes the usage of ASUS utilities (ASUS EPU, TurboV EVO, etc.).

Other 3rd party OC utilities may not be full-functioned.

[3rd Party Utility] Prioritizes 3rd party OC utilities (IXTU, SetFS, etc.). ASUS utilities can’t be

launched.

1 ... 49 50 51 ... 70

Comments to this Manuals

No comments

Asus P7H55/USB3 User Manual Page 50

Comments to this Manuals

Related products and manuals for Motherboard Asus P7H55/USB3