Asus P9X79 DELUXE User Manual download pdf (Page 156)

4-26 Chapter 4: Software support

Chapter 4

4.4.5 Marvell RAID utility

The onboard Marvell SATA 6.0 Gb/s controller allows you to create a RAID 0 or

RAID 1 array using two SATA hard disk drives. Refer to Chapter 2 of your motherboard user

manual for the exact location of the Marvell SATA 6.0 Gb/s connector.

To enter the Marvell utility, press <Ctrl> + <M> during POST.

All exisiting data on the hard disk drives will be erased when creating or deleting a RAID

array. Ensure that you have back up all your data in your hard disk drives before making

any change to the drive status.

Topology Information

Help

Marvell RAID on chip controller.

ENTER: Operation F10: Exit/Save ESC: Return

HBA 0: Marvell 0

├ Virtual Disks

└ Free Physical Disks

├ PD 0: ST3160812AS

└ PD 8: ST3160812AS

Vendor ID : 1B4B

Device ID : 9130

Revision ID : B1

BIOS Version : 1.0.0.1028

Firmware Version: 2.2.0.1105

PCIe Speed Rate : 5.0Gbps

Congure SATA as: AHCI Mode

▶ ▶

Create a RAID Array

1. Move the selection bar to HBA 0: Marvell 0 and press <Enter>.

2. Select Conguration Wizard and press <Enter>.

3. Press <Space> to select the hard drives to be included in the RAID array.

An asterisk (*) appears in front of the selected hard drive. After selecting all the drives

needed for the RAID array, press <Enter> to continue.

Congure->Select free disks

Help

Use space bar to select the free disks to be used in the array.

ENTER: Operation SPACE: Select F10: Exit/Save ESC: Return

HBA 0: Marvell 0

├ Virtual Disks

└ Free Physical Disks

* ├ PD 0: ST3160812AS

└ PD 8: ST3160812AS

Port ID : 0

PD ID : 0

Type : SATA PD

Status : Uncongured

Size : 152626MB

Feature Support : MCQ 3G 48Bits

Current Speed : 3G

Model : ST3160812AS

Serial : 9LS0F4HL

FW Version : 3.AAE

▶ ▶

1 ... 155 156 157 ... 176

Comments to this Manuals

No comments

Asus P9X79 DELUXE User Manual Page 156

Comments to this Manuals

Related products and manuals for Motherboard Asus P9X79 DELUXE