Asus 810 User Manual download pdf (Page 17)

ASUS CUW User’s Manual 17

3. HARDWARE SETUP

Motherboard Settings

3. H/W SETUP

3.3 Hardware Setup Procedure

Before using your computer, you must complete the following steps:

• Check Motherboard Settings

• Install Memory Modules

• Install the Central Processing Unit (CPU)

• Install Expansion Cards

• Connect Ribbon Cables, Panel Wires, and Power Supply

3.4 Motherboard Settings

This section explains in detail how to change your motherboard’s function settings

through the use of switches and/or jumpers.

WARNING! Computer motherboards and expansion cards contain very delicate

Integrated Circuit (IC) chips. To protect them against damage from static electric-

ity, you should follow some precautions whenever you work on your computer.

1. Unplug your computer when working on the inside.

2. Use a grounded wrist strap before handling computer components. If you do

not have one, touch both of your hands to a safely grounded object or to a metal

object, such as the power supply case.

3. Hold components by the edges and try not to touch the IC chips, leads or con-

nectors, or other components.

4. Place components on a grounded antistatic pad or on the bag that came with the

component whenever the components are separated from the system.

Motherboard Feature Settings (DSW)

Besides jumper settings, some of the motherboard’s onboard functions are adjusted

through the DIP switches. The white block represents the switch’s position. The

example below shows all the switches in the OFF position.

0 10 10 1

CUW

1. Frequency Selection

2. Frequency Selection

3. Frequency Selection

4. Frequency Selection

5. Frequency Selection

CUW DIP Switches

DSW

OFF

12345

1 ... 16 17 18 ... 128

No comments

Asus 810 User Manual Page 17