Asus 810 User Manual download pdf (Page 68)

ASUS CUW User’s Manual68

4. BIOS SETUP

UART2 Use Standard Infrared [Disabled]

When enabled, this field activates the onboard standard infrared feature and sets the

second serial UART to support the infrared module connector on the motherboard. If

your system already has a second serial port connected to the onboard COM2 connec-

tor, it will no longer work if you enable the infrared feature. See IrDA-Compliant

Infrared Module Connector in 3.8 External Connectors. Configuration options:

[Disabled] [Enabled]

Onboard Parallel Port [378H/IRQ7]

This field sets the address of the onboard parallel port connector. If you disable this

feature, Parallel Port Mode and ECP DMA Select configurations will not be avail-

able. Configuration options: [Disabled] [378H/IRQ7] [278H/IRQ5]

Parallel Port Mode [ECP+EPP]

This field allows you to set the operation mode of the parallel port. [Normal] allows

normal-speed operation but in one direction only; [EPP] allows bidirectional parallel

port operation; [ECP] allows the parallel port to operate in bidirectional DMA mode;

[ECP+EPP] allows normal speed operation in a two-way mode. Configuration op-

tions: [Normal] [EPP] [ECP] [ECP+EPP]

ECP DMA Select [3]

This field allows you to configure the parallel port DMA channel for the selected ECP

mode. This selection is available only if you select [ECP] or [ECP+EPP] in Parallel

Port Mode above. Configuration options: [1] [3] [Disabled]

Onboard Game Port [200H-207H]

This field sets the address of the onboard game port connector. Configuration options:

[Disabled] [200H-207H] [208H-20FH]

Onboard MIDI I/O [Disabled]

This field sets the address of the onboard MIDI connector. Configuration options: [Dis-

abled] [330H-331H] [300H-301H]

Onboard MIDI IRQ [xx]

This field is not available if you select [Disabled] for the Onboard MIDI I/O field.

Configuration options: [3] [4] [5] [7] [9] [10] [11] [12] [14] [15]

Onboard CIR I/O [Disabled]

This field sets the address of the onboard Consumer IR connector. Configuration op-

tions: [Disabled] [2E0-2E8H] [3E0-3E8H]

Onboard CIR IRQ [xx]

This field is not available if you select [Disabled] for the Onboard CIR I/O field.

Configuration options: [3] [4] [5] [7] [9] [10] [11] [12] [14] [15]

I/O Device Config

1 ... 67 68 69 ... 128

No comments

Asus 810 User Manual Page 68