Asus CUSL2K User Manual download pdf (Page 53)

ASUS CUSL2K User’s Manual 53

4. BIOS SETUP

NOTE: Before attempting to configure a hard disk drive, make sure you

have the configuration information supplied by the manufacturer of the

drive. Incorrect settings may cause your system to not recognize the in-

stalled hard disk. To allow the BIOS to detect the drive type automati-

cally, select [Auto].

Type [Auto]

Select [Auto] to automatically detect an IDE hard disk drive. If automatic

detection is successful, the correct values will be filled in for the remaining

fields on this sub-menu. If automatic detection fails, your hard disk drive

may be too old or too new. You can try updating your BIOS or enter the

IDE hard disk drive parameters manually.

NOTE: After the IDE hard disk drive information has been entered into

BIOS, new IDE hard disk drives must be partitioned (such as with FDISK)

and then formatted before data can be read from and write on. Primary

IDE hard disk drives must have its partition set to active (also possible

with FDISK).

Other options for the Type field are:

[None] - to disable IDE devices

4.3.1 Primary & Secondary Master/Slave

Master/Slave Drives

1 ... 52 53 54 ... 122

No comments

Asus CUSL2K User Manual Page 53