Asus CUSL2K User Manual download pdf (Page 71)

ASUS CUSL2K User’s Manual 71

4. BIOS SETUP

Power Up Control

AC PWR Loss Restart [Disabled]

This allows you to set whether you want your system to reboot after the

power has been interrupted. [Disabled] leaves your system off and [En-

abled] reboots your system. [Previous State] sets your system back to the

state it is before the power interruption. Configuration options: [Disabled]

[Enabled] [Previous State]

PWR Up On External Modem Act [Disabled]

This allows either settings of [Enabled] or [Disabled] for powering up the

computer when the external modem receives a call while the computer is

in Soft-off mode. NOTE: The computer cannot receive or transmit data

until the computer and applications are fully running. Thus connection can-

not be made on the first try. Turning an external modem off and then back

on while the computer is off causes an initialization string that will also

cause the system to power on. Configuration options: [Disabled] [Enabled]

Wake On LAN or PCI Modem[Disabled]

Wake-On-LAN/PCI Modem allows your computer to be booted from an-

other computer via a network by sending a wake-up frame or signal. Con-

figuration options: [Disabled] [Enabled]

IMPORTANT: This feature requires an optional network interface card with Wake-

On-LAN and an ATX power supply with at least 720mA +5V standby power.

4.5.1 Power Up Control

1 ... 70 71 72 ... 122

No comments

Asus CUSL2K User Manual Page 71