Asus E3746 Specifications download pdf (Page 162)

5-36 Chapter 5: Software support

Setting the BIOS RAID items

After installing the hard disk drives, make sure to set the necessary RAID items in



To set the BIOS RAID items:

1. Boot the system and press <Del> during the Power-On Self-Test (POST) to

enter the BIOS Setup Utility.

2. Go to Advanced > Serial-ATA Conguration and enable the RAID Enabled



3. Enable the SATA 1/2/3 Primary/Secondary RAID drive(s) that you want to



4. Save your changes and Exit Setup.

5.4.2 NVIDIA

RAID congurations

The motherboard includes a high performance SATA RAID controller integrated in

the NVIDIA

southbridge chipset. It supports RAID 0, RAID 1, RAID 0+1, RAID 5

and JBOD for six independent Serial ATA channels.

Installing Serial ATA (SATA) hard disks

The motherboard supports Ultra DMA 133/100/66 and Serial ATA hard disk drives.

For optimal performance, install identical drives of the same model and capacity

when creating a disk array.



1. Install the SATA hard disks into the drive bays.

2. Connect the SATA signal cables.

3. Connect a SATA power cable to the power connector on each drive.

Refer to the RAID controllers user manual in the motherboard support DVD for

5.2.5 Manuals menu.

1 ... 161 162 163 ... 196

No comments

Asus E3746 Specifications Page 162