Asus E3746 Specifications download pdf (Page 47)

ROG Striker II Extreme / Striker II NSE 2-21

2.4.3 Installing a DIMM

Unplug the power supply before adding or removing DIMMs or other

system components. Failure to do so can cause severe damage to both the

motherboard and the components.

To install a DIMM:

1. Unlock a DIMM socket by

pressing the retaining clips

outward.

2. Align a DIMM on the socket

such that the notch on the

DIMM matches the break on the

socket.

3. Firmly insert the DIMM into the

socket until the retaining clips

snap back in place and the

DIMM is properly seated.

2.4.4 Removing a DIMM

To remove a DIMM:

1. Simultaneously press the retaining

clips outward to unlock the DIMM.

2. Remove the DIMM from the socket.

Support the DIMM lightly with



the retaining clips. The DIMM

might get damaged when it



 

not force a DIMM into a socket to avoid damaging the DIMM.

• The DDR3 DIMM sockets do not support DDR or DDR2 DIMMs. Do not

install DDR or DDR2 DIMMs to the DDR3 DIMM sockets.

Unlocked retaining clip

DDR3 DIMM notch

1 ... 46 47 48 ... 196

No comments

Asus E3746 Specifications Page 47