ROG Striker II Extreme / Striker II NSE
2-31
13. IEEE 1394a port. This 6-pin IEEE 1394a port provides high-speed
connectivity for audio/video devices, storage peripherals, PCs, or portable
devices.
14. Clear CMOS switch. Press the clear CMOS switch to clear setup information
when the system hangs due to overclocking.
15. Optical S/PDIF Out port. This port connects an external audio output device
via an optical S/PDIF cable.
16. USB 2.0 ports 5 and 6. These 4-pin Universal Serial Bus (USB) ports are
available for connecting USB 2.0 devices.
• DO NOT insert different cables to the external SATA ports.
• DO NOT unplug the external Serial ATA box when a RAID 0 or JBOD is
• Before creating a RAID set using Serial ATA hard disks, make sure that you
have connected the Serial ATA signal cable and installed Serial ATA hard
BIOS setup during POST.
the JMicron RAID controller in the BIOS to [RAID]. See section 4.5.3
Onboard Device Conguration for details.
• When using hot-plug and NCQ, set the JMicron RAID controller in the
BIOS to [AHCI]. See section 4.5.3 Onboard Device Conguration for
details.
• Before creating a RAID set, refer to 5.4.4 JMicron
®
RAID Conguration or
the manual bundled in the motherboard support DVD.
Comments to this Manuals