Asus MES-N User Manual download pdf (Page 38)

38 K7M User’s Manual

3. HARDWARE SETUP

Connectors

3. H/W SETUP

10) Wake-On-LAN Connector (3-pin WOL_CON)

This connector connects to a LAN card with a Wake-On-LAN output, such as

the ASUS PCI-L101 Ethernet card (see 7. Appendix). The connector powers up

the system when a wakeup packet or signal is received through the LAN card.

IMPORTANT: This feature requires that Wake-On-Lan features are enabled

(see 4.4.3 Power Management) and that your system has an ATX power supply

with at least 720mA +5V standby power.

0 10 10 1

K7M

K7M Wake-On-LAN Connector

IMPORTANT: Requires an ATX power

supply with at least 720mA +5 volt

standby power

+5 Volt Standby

PME

Ground

WOL_CON

11) Wake-On-Ring Connector (2-pin WOR)

This connector connects to internal modem cards with a Wake-On-Ring output.

The connector powers up the system when a ringup packet or signal is received

through the internal modem card. NOTE: For external modems, Wake-On-Ring

is detected through the COM port.

IMPORTANT: This feature requires that Wake-On-Ring features are enabled

(see 4.4.3 Power Management) and that your system has an ATX power supply

with at least 720mA +5V standby power.

0 10 10 1

K7M

K7M Wake-On-Ring Connector

WOR

Ring#Ground

1 ... 37 38 39 ... 96

No comments

Asus MES-N User Manual Page 38