Asus MES-N User Manual download pdf (Page 53)

K7M User’s Manual 53

4. BIOS SETUP

Master/Slave Drives

4.3.1 Primary & Secondary IDE Master/Slave

Select any one of the four IDE device configuration fields from the main menu and

press <Enter>. The default setting [Auto] leads you to a screen as follows:

Under the [Auto] setting, the BIOS is able to detect the drive type automatically

during bootup. To show the detected hard drive information, press <Enter> when

the IDE Device Configuration field is highlighted and the default setting [Auto] is

shadowed. In the pop-up menu, select [Auto] and press <Enter> again. The shad-

owed option for the IDE Device Configuraiton field will turn to [User] and de-

tected values will be filled in for the remaining of the fields (as shown below), but

you can still make changes to these fields manually.

User Defined Drive Information

You may select [User] for the IDE Device Configuration field to manually enter

the number of cylinders, heads, sectors, and so on for your drive.

NOTE: Before attempting to configure a hard disk drive, make sure you have the

configuration information supplied by the manufacturer of the drive. Incorrect set-

tings may cause your system to not recognize the installed hard disk.

1 ... 52 53 54 ... 96

No comments

Asus MES-N User Manual Page 53