K7M User’s Manual54
4. BIOS SETUP
Cylinders
This field configures the number of cylinders. Refer to your drive documentation to
determine the correct value to enter into this field.
Heads
This field configures the number of read/write heads. Refer to your drive documen-
tation to determine the correct value to enter into this field.
Write Precompensation [0]
Leave on default setting.
Sectors
This field configures the number of sectors per track. Refer to your drive documen-
tation to determine the correct value to enter into this field.
Maximum Capacity
This field shows the drive’s maximum capacity.
LBA Mode [On]
When Logical Block Addressing is enabled, 28-bit addressing of the hard drive is
used without regard for cylinders, heads, or sectors. Note that Logical Block Ac-
cess may decrease the access speed of the hard disk. However, LBA Mode is nec-
essary for drives with greater than 504MB in storage capacity. Available options:
[Off] [On]
Block Mode [On]
This option enables or disables the multiple sector transfer mode. Available options:
[Off] [On]
Fast Programmed I/O PIO Modes [4]
This option lets you set a PIO (Programmed Input/Output) mode for the IDE device.
Modes 0 through 5 provide successively increased performance. Available options:
[Auto] [0] [1] [2] [3] [4] [5]
32 Bit Transfer Mode [On]
This motherboard supports the 32 bit transfer mode. Leave on default setting.
4. BIOS SETUP
Master/Slave Drives
Boot Sector Virus Protection [Disabled]
This field allows you to set boot virus detection, ensuring a virus-free boot sector.
The system halts and displays a warning message when it detects a virus. If this
occurs, you can either allow the operation to continue or use a virus-free bootable
floppy disk to restart and investigate your system. Yet because of conflicts with new
operating systems, for example, during installation of new software, the default is
set to [Disabled] to prevent write errors.
Comments to this Manuals