Asus P2E-N User Manual download pdf (Page 14)

14 ASUS P2L-N/P2E-N User’s Manual

Jumpers

III. INSTALLATION

Installation Steps

Before using your computer, you must complete the following steps:

1. Set Jumpers on the Motherboard (if necessary)

2. Install System Memory Modules

3. Install the Central Processing Unit (CPU)

4. Install Expansion Cards

5. Connect Ribbon Cables, Cabinet Wires, and Power Supply

6. Setup the BIOS Software

1. Jumpers

1. Audio Setting (JP1)

This jumper allows you to enable or disable the onboard audio. This is normally

set to enable unless you add an audio expansion card in which case you would

need to disable the onboard audio to prevent hardware conflicts.

P2L-N/P2E-N Onboard Audio Setting

JP1

Audio Enable

JP1

Audio Disable

WARNING! Computer motherboards, baseboards and components, such as SCSI

cards, contain very delicate Integrated Circuit (IC) chips. To protect them against

damage from static electricity, you should follow some precautions whenever you

work on your computer.

1. Unplug your computer when working on the inside.

2. Use a grounded wrist strap before handling computer components. If you do

not have one, touch both of your hands to a safely grounded object or to a

metal object, such as the power supply case.

3. Hold components by the edges and try not to touch the IC chips, leads or

connectors, or other components.

4. Place components on a grounded antistatic pad or on the bag that came with

the component whenever the components are separated from the system.

III. INSTALLATION

1 ... 13 14 15 ... 120

No comments

Asus P2E-N User Manual Page 14