Asus P2E-N User Manual download pdf (Page 27)

ASUS P2L-N/P2E-N User’s Manual 27

11. Primary IDE Connector (40-1 pin IDE)

This connector supports the provided IDE hard disk drive ribbon cable. After

connecting one end to the riser card, connect the other end to a hard disk drive.

The primary IDE channel supports both a master and a slave IDE device but the

system housing size only permits a standard IDE hard drive to be installed.

Primary IDE Connector

IDE (Hard Disk Drive) Connector

Orient the red stripe on the

IDE ribbon cable to Pin 1

Pin 1

12. 3.5inch Floppy Disk Drive Connector (34-1 pin FLOPPY)

This connector supports the provided floppy drive ribbon cable. After connect-

ing the single end to the riser card, connect the other end to a 3.5inch floppy disk

drive.

Panel Conn.

Riser Slot

Floppy Drive Conn.

Floppy Disk Drive Connector

Orient the red stripe on the

floppy ribbon cable to Pin 1

Pin 1

Riser Card Front

13. LAN Activity Connectors (2 pin LAN_LED & 3 pin WOL_CON)

These connectors support Local Area Network (LAN) cards such as the ASUS

PCI-L101 with output signals for data transfer activity. The LAN_LED connec-

tor allows the front panel LED to blink during transfer activity between the

network and the computer. The WOL_CON connector allows the system to power

up when there is a wakeup package (signal) received from the network.

Riser Slot

LAN Activity Connectors

Riser Card Front

LAN activity LED

Wake on LAN activity

III. INSTALLATION

Connectors

III. INSTALLATION

1 ... 26 27 28 ... 120

No comments

Asus P2E-N User Manual Page 27