Asus TX97-N User Manual download pdf (Page 13)

ASUS TX97-N User’s Manual 13

III. INSTALLATION

(Jumpers)

1. Real Time Clock (RTC) RAM (RTCLR)

The CMOS RAM is powered by the onboard button cell battery. To clear the

RTC data: (1) Turn off your computer and remove the AC power , (2) Move this

jumper to “Clear Data,” (3) Move the jumper back to “Operation,” (4) Turn on

your computer, (5) Hold down <Delete> during bootup and enter BIOS setup to

re-enter user preferences.

Battery Test Jumper (RTCLR)

You can test the battery’s current by removing this jumper and attaching a cur-

rent meter to the “Operation” pins.

WARNING! You must unplug the power cord to your power supply to en-

sure that there is no power to your motherboard. The CMOS RAM con-

taining BIOS setup information may be cleared by this action. You should

enter BIOS to “Load Setup Defaults” and re-enter any user information

after removing and reapplying this jumper.

RTC RAM RTCLR

Operation [2-3] (Default)

Clear Data [1-2] (momentarily)

Jumper Settings

Real Time Clock (RTC) RAM

Operation (Default)

RTCLR

Clear Data

RTCLR

Battery Test

1 ... 12 13 14 ... 60

No comments

Asus TX97-N User Manual Page 13