Asus TX97-N User Manual download pdf (Page 46)

ASUS TX97-N User’s Manual46

IV. BIOS SOFTWARE

PNP and PCI Setup

This “PNP and PCI Setup” option configures the PCI bus slots. All PCI bus slots on

the system use INTA#, thus all installed PCI cards must be set to this value.

NOTE: SETUP Defaults are noted in parenthesis next to each function heading.

Details of PNP and PCI Setup

PNP OS Installed (No)

When Plug and Play operating systems (OS) are installed, interrupts may be reas-

signed by the OS when Yes is selected. When a non-Plug and Play OS is installed or

to prevent reassigning of interrupt settings, select No.

IV. BIOS

(PnP and PCI)

Fan Monitor (xxxxRPM)

The onboard hardware monitor is able to detect the Chassis Fan Speed, CPU Fan

Speed, and the Power Supply Fan Speed in Rotations Per Minute (RPM). These

values refresh upon any key entries in the BIOS setup screen. Set to Ignore if one of

these are not used so that error messages will not be given.

Thermal Monitor (xxxC/xxxF)

The onboard hardware monitor is able to detect the CPU and MB (motherboard) tem-

peratures. These values refresh upon key entries. Set to Ignore only if necessary.

Voltage Monitor (xx.xV)

The onboard hardware monitor is able to detect the voltages put out by the voltage

regulators. These values refresh upon key entries. Set to Ignore only if necessary.

NOTE: If any of the monitored items are out of range, you will be prompted by this

message: “Hardware Monitor found an error, enter POWER MANAGEMENT

SETUP for details” The bottom of the screen will instruct you to: “Press F1 to

continue, DEL to enter SETUP”

1 ... 45 46 47 ... 60

No comments

Asus TX97-N User Manual Page 46