Asus A7VL-VM User Manual download pdf (Page 34)

34 ASUS A7VL-VM User’s Manual

Connectors

3. H/W SETUP

3. HARDWARE SETUP

21) ATX Power Supply Connector (20-pin block ATXPWR)

This connector connects to an ATX power supply. The plug from the power sup-

ply will only insert in one orientation because of the different hole sizes. Find the

proper orientation and push down firmly making sure that the pins are aligned.

IMPORTANT: Make sure that your ATX power supply can supply at least 10mA

on the +5-volt standby lead (+5VSB). You may experience difficulty in power-

ing ON your system if your power supply cannot support the load. For Wake-

On-LAN support, your ATX power supply must supply at least 720mA +5VSB.

22) IDE Activity LED (2-pin IDELED)

This connector supplies power to the cabinet’s IDE activity LED. Read and

write activity by devices connected to the Primary/Secondary IDE and Primary/

Secondary ATA100 connectors will cause the LED to light up.

A7VL-VM

A7VL-VM IDE Activity LED

TIP: If the case-mounted LED does not

light, try reversing the 2-pin plug.

IDELED

A7VL-VM

A7VL-VM ATX Power Connector

+3.3 Volts

-12.0 Volts

Ground

Power Supply On

Ground

-5.0 Volts

+5.0 Volts

Power Good

+12.0 Volts

+3.3 Volts

Ground

+5.0 Volts

Ground

+5.0 Volts

Ground

+5V Standby

1 ... 33 34 35 ... 92

No comments

Asus A7VL-VM User Manual Page 34