Asus A7VL-VM User Manual download pdf (Page 60)

ASUS A7VL-VM User’s Manual60

4. BIOS SETUP

PCI Configuration

Slot 1, Slot 2, Slot 3 IRQ [Auto]

These fields set how IRQ use is determined for each PCI slot. The default setting

for each field is [Auto], which utilizes auto-routing to determine IRQ use. Con-

figuration options: [Auto] [NA] [3] [4] [5] [7] [9] [10] [11] [12] [14] [15]

PCI/VGA Palette Snoop [Disabled]

Some nonstandard VGA cards, such as graphics accelerators or MPEG video cards,

may not show colors properly. The setting [Enabled] should correct this problem.

Otherwise, leave this on the default setting of [Disabled]. Configuration options:

[Disabled] [Enabled]

PCI Latency Timer [32]

Leave on default setting for best performance vs. stability.

SYMBIOS SCSI BIOS [Auto]

[Auto] allows the motherboard’s BIOS to detect whether you have a Symbios SCSI

card. If the Symbios SCSI card is detected, the motherboard’s Symbios BIOS will

be enabled; if no Symbios SCSI card is detected, the onboard Symbios SCSI BIOS

will be disabled.

[Disabled] will disable the motherboard’s Symbios SCSI BIOS so that the BIOS

on an add-on Symbios SCSI card can be used. If your Symbios SCSI card does not

have a BIOS, the Symbios SCSI card will not function. Configuration options: [Auto]

[Disabled]

4.4.3 PCI Configuration

1 ... 59 60 61 ... 92

No comments

Asus A7VL-VM User Manual Page 60