Asus CUV266-D User Manual download pdf (Page 33)

ASUS CUV266-D User’s Manual 33

3. HARDWARE SETUP

Connectors

3. H/W SETUP

4) Wake-On-LAN Connector (3-pin WOL_CON)

This connector connects to a LAN card with a Wake-On-LAN output, such as

the ASUS PCI-L101 Ethernet card (see 7. Appendix). The connector powers up

the system when a wakeup packet or signal is received through the LAN card.

IMPORTANT: This feature requires that Wake On LAN or PCI Modem

parameter is enabled (see 4.5.1 Power Up Control) and that your system has an

ATX power supply with at least 720mA +5V standby power.

5) Wake-On-Ring Connector (2-pin WOR)

This connector connects to internal modem cards with a Wake-On-Ring output.

The connector powers up the system when a ringup packet or signal is received

through the internal modem card. NOTE: For external modems, Wake-On-Ring

is detected through the COM port.

IMPORTANT: This feature requires that Wake On LAN or PCI Modem

parameter is enabled (see 4.5.1 Power Up Control) and that your system has an

ATX power supply with at least 720mA +5V standby power.

CUV266-D

0 10 10 10 1

CUV266-D Wake-On-LAN

Connector

IMPORTANT: Requires an ATX power

supply with at least 720mA +5 volt

standby power.

+5 Volt Standby

PME

Ground

WOL_CON

CUV266-D Wake-On-Ring

Connector

WOR

RI#

Ground

CUV266-D

0 10 10 10 1

1 ... 32 33 34 ... 88

No comments

Asus CUV266-D User Manual Page 33