Asus CUV266-D User Manual download pdf (Page 36)

36 ASUS CUV266-D User’s Manual

3. HARDWARE SETUP

Connectors

3. H/W SETUP

10) Power Supply Connectors (20-pin block ATXPWR, 6-pin EAUXPWR)

These connectors connect to an ATX 12V power supply. The plugs from the power

supply fit in only one orientation because of the different hole sizes. Find the

proper orientation and push down firmly making sure that the pins are aligned.

IMPORTANT: Make sure that the ATX 12V power supply (minimum

recommended wattage: 230W) can supply at least 10mA on the +5-volt standby

lead (+5VSB). The system may become unstable and may experience difficulty

powering up if the power supply is inadequate. For Wake-On-LAN support, the

ATX power supply must supply at least 720mA +5VSB.

CUV266-D

0 10 10 10 1

CUV266-D ATX Power Connector

+3.3 Volts

-12.0 Volts

Ground

Power Supply On

Ground

-5.0 Volts

+5.0 Volts

Power Good

+12.0 Volts

+3.3 Volts

Ground

+5.0 Volts

Ground

+5.0 Volts

Ground

+5V Standby

EAUXPWR

ATXPWR

Pin 1

GND

+3V

+5V

1 ... 35 36 37 ... 88

No comments

Asus CUV266-D User Manual Page 36